Innanzitutto mi presento....sono angelo e sono nuovo qui....premettendo che sono poco esperto ho un problema molto grave!!!allora:siccome volevo proteggere la mia rate wireless sn andato su interent e sn entrato nel router. Dopo un pò di cambiamenti ho messo l'indirizzo Ip e adesso mi si connette ma non mi visualizza le pagine internet!!!!non so proprio come fare!!vi allego le impostazioni che mi sono uscite!!come devo fare??vi prego aiutatemi sono disperato!!
:( You have now completed the Router Configuration Wizard, and a summary of your chosen configuration is shown below.
Wireless Channel 11
Service Area Name/SSID 3Com
LAN IP Address 192.168.1.1
LAN Subnet Mask 255.255.255.0
DHCP Server Disable
IP Pool Range
Internet Addressing Mode Dynamic
Hostname
MAC Address for Internet Connection 00-16-36-14-DC-42 (Cloned)
Timezone (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
Enable Daylight savings NO
Note that no settings are saved until you press 'Finish' - to go back and make any changes, press 'Back'. To exit without saving the changes, press 'Cancel'.
Congratulations! Your settings have been saved, and you have finished the Setup Wizard.
As you have chosen to turn off the Router's DHCP Server, you will need to update the network settings of the PCs on your LAN, using the following values:
A valid IP address in the range 192.168.1.2 to 254
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DNS Server 192.168.1.1
Alternatively, if you have a DHCP server elsewhere on your LAN, it should be configured with the above settings.
If you already have wireless PCs on your network, you will need to make sure that they are set to "Infrastructure Mode", and that they are set to use channel 11 with a Service Area Name/SSID of 3Com.
3Com recommends that you enable WEP encryption to improve security. To enable WEP Encryption, go to the Wireless Settings menu, click on the Encryption tab and select the WEP encryption type you require.
